|
|
| HOME | PHOTOS | VIDEOS | CONTACTS | DIRECTIONS | DYNO 101 | DYNOGIRL | |
| DYNO SPECS | PRICING | PROCEDURE | DATABASE | PARTS | LINKS |
Directions
DO NOT USE MAPQUEST - YOU MAY GET LOST
From Rt. 84: Take exit 56. Take a left at the end of the exit. Go straight through an intersection with a stop sign. Bristol Dyno is a few hundred yards down the road on your right. Look for the large, fenced in parking lot in front of a tall garage with 3 bays. We are in between a diner and a Bart Truck equipment place. See the video below.
From Rt. 91: Get onto rt. 84 E in Hartford. Follow the directions above. Remember that exit 56 is a left-hand exit, and it will appear shortly after you get onto rt. 84.
From Rt. 2 going West: Take the exit marked "EAST HARTFORD" - there is no exit number. It is in between the exits for 84 E and W. It will turn into the same exit off ramp described above in "From Rt. 84."
From Routes 5 & 15 (Berlin Turnpike) going North: Bear right at the end of the pike just past Hooters. Stay in the left lane until you're going over the bridge, then get in the right lane, cut across the merging traffic, and get off, following the signs for rt. 2 W. Follow the directions above "From Rt. 2."
Or - click on one of these:
To see what the drive will look like,
click on this picture and watch this movie. This was taken when I was going
rt. 84 east, but once one gets off of the highway, this is how it also looks from
rt. 84 West and rt. 2.